KZM 6R
Manufacturer:
ZMM Stomana
Technical specification of KZM 6R
|
Technical data |
dim. |
value |
|
|
|
|
|
Thickness of machined pieces |
mm |
8-45 |
|
Minimum length of machined pieces |
mm |
100 |
|
Minimum width of the piece |
mm |
100 |
|
Thickness of the edges |
mm |
0.4-3.0 |
|
Feeding speed |
m/min |
9.5 |
| Edge trim unit |
|
|
| - power of the motor |
kW |
2x0.22 |
| - RPM of the motor | Min-1 | 12 000 |
| Milling unit | ||
| - power of the motor | kW | 2x0.55 |
| - RPM of the motor | Min-1 | 12 000 |
| Rounding unit | ||
| - minimum length of machined pieces | mm | 250 |
| - power of the motor | kW | 1x0.35 |
| - RPM of the motor | Min-1 | 12 000 |
| Pre-milling unit | ||
| - power of the motor | kW |
1x1.1 1x 0.75 |
| - RPM of the motor | Min-1 | 12 000 |
| Edge scraper unit | ||
| Glue scraper unit | ||
| Polishing unit | ||
| - power of the motor | kW | 2x0.18 |
| - RPM of the motor | Min-1 | 2800 |
| Supporting beams - movable with rollers | ||
| Diameters of aspiration plugs | mm | 2x120, 2x120 |
| Compressed air presure | Bar | 6.5 |
| Total installing power | kW | 6.7 |
| Size | ||
| Weight | kg | 1180 |
| LxBxH | mm | 4200x1220x1470 |
Standard equipment
One-side edgebanding machine right execution. Roller holder - up to ø 600 mm. Teflon glue tank under melting roller. Apply the glue by means of glue roller in a direction identical as the piece direction without need of adjusting towards material's thickness. Electronic regulation of the glue temperature. Automatic lowering the temperature of the glue at recess. A guillotine for pre- cutting of thick PVC /ABS edges max. 3 x 45. Squeezing area: two rollers – the big positive pressure; pressing with spring. End trimming unit with one HF motor – 200Hz, 12000rpm. Circular blades Ø110 x Ø32, Z=30 teeth – 2 pieces. Pre-trimming unit – two HF motors – 1.1kW и 0.75 kW, 12 000 min-1. Diamonds trimming heads – PCD CUTTER D.60 x d20 x 48 Z 3+3. Glue scraper unit. Polishing unit – two motors, two polishing discs 2xø125mm, 2x0.18kW, 2800 min-1. Central manual adjustable upper squeezing. Transport system with chain. Pressing rollers with bearings. Supporting beam with rollers - immobile. PLC Control panel at the front side of the machine. Environment temperature: + 18° max + 35°C.
Optional equipment
Unit for upper and lower milling with vertical and horizontal adjustment with two HF motors 200 Hz, 12000 rpm and milling heads ø 75mm, Z = 4; 15, R2 or R3 mm (option). Rounding unit with one HF motor -200Hz, 12000rpm. Diamond milling head - PCD CUTTER D68/61x d16 x 7 Z=4 R2 or R3 (option). End scraper unit R2 or R3 mm