Products
- Milling machines
- Presses
- Band saw cutting machines
- Drilling machines
- Slotting machines
- Lathes
- Oil country lathes
- Grinding machines
- Woodworking machines
- Other
- Cranes and hoists
- Sheet metal deburring & Tube deburring machines
- Polishing machines
- Pipe notching machines
- Bevelling machines
- Sharpening machines
- Dust Extractors
Contacts
Russia
119285 Moscow, Pirieva str.
Warehouse: Moscow, Shcherbinka,
Zheleznodorozhnaya str. 24
Tel:
+7(926) 11 54 2 54
+7(915) 47 96 6 32
+7(499) 14 30 4 50
+7(499) 14 32 7 56
Other equipment
CU325
Technical specification of CU325
|
Technical data |
Dim. |
Value |
|
|
|
|
|
Height of centers |
mm |
165 |
|
Swing over bed |
mm |
325 |
|
Swing over cross slide |
mm |
190 |
|
Swing in gap - only DBC 1000mm |
mm |
440 |
|
Width of bed |
mm |
200 |
|
Distance between centers |
mm |
500; 750; 1000 |
|
Bar material |
mm |
30 |
|
Spindle |
||
|
Spindle nose DIN 55027 |
№ |
5 |
|
Spindle bore |
mm |
32 |
|
Spindle taper |
Morse |
4.5 |
|
Feeds |
||
|
Number of feeds |
|
48 |
|
Longitudinal feed range |
mm/rev |
0.006-1.77 |
|
Cross feed range |
mm/rev |
0.003-0.885 |
|
Toolpost |
||
|
Toolpost shank size |
mm |
20x20 |
|
Threads |
||
|
Number of threads |
|
As below |
|
Metric thread range |
mm |
(48) 0.1-28 |
| Inch thread range | Tpi | (53) 75-2.5 |
| Module thread range | Module | (19) 0.1-1.75 |
| DP thread range | DP | (19) 70-4 |
|
Carriage |
||
|
Cross slide travel |
mm |
150 |
|
Top slide travel |
mm |
95 |
|
Tailstock |
||
|
Quill diameter |
mm | 40 |
|
Quill taper |
Morse | № 3 |
|
Quill travel |
mm | 100 |
|
Motor |
||
| Number of gears of main motor | 12 (24) | |
| Range of motor revolutions | rpm | 85-2000 (42.5-2000)* |
| Main motor power | kW | 2.2 |
| Coolant pump motor power | kW | 0.09 |
| Weight | ||
| For DBC 500, 750, 1000 | kg | 550, 630, 770 |
| Size | ||
| Length for DBC 500, 750, 1000 | mm | 1620, 1884, 2150 |
| Width | mm | 820 |
| Height | mm |
1300 |
* Only for two-speed motor execution
Standard equipment
Main drive motor 2,2 KW, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, 250mm. flange, Back cover along lathe, Chuck cover plate, Toolpost cover, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, 1-position trailing stop, Fast-screwing tailpost, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual, Standard color.
Optional acceessory
3-JAW selfcentering chuck, Independent 4-JAW chuck, Face plate, Followe rest, Steady rest (small size), Taper turning attachm., One-position long. stop, Thread dial, Drive plate for spindle nose DIN 55027, Set of lathe dogs, Live center, Drill chuck with arbor.