C350TS
Manufacturer:
ZMM Bulgaria Holding Jsc.
Technical specification of C350TS
| Technical data | Dim. | Value |
|---|---|---|
| Height of centers | mm | 175 |
| Swing diameter over bed | mm | 350 |
| Swing diameter over carriage | mm | 200 |
| Swing diameter over gap in bed | mm | 510 |
| Width of ways | mm | 320 |
| Distance between centers | mm | 500, 750, 1000 |
| Bar material | mm | 50 |
| Spindle | ||
| Spindle nose DIN 55027 | № | 6 |
| Spindle nose taper | mm | 52 |
| Spindle bore | KM | 6 |
| Feed | ||
| Feed quantity | pcs. | 40 |
| Longitudinal feed range | mm/rev | 0,05 - 0,8 |
| Transverse feed range | mm/rev | 0,025 - 0,4 |
| Toolpost | ||
| Toolpost shank size | mm | 20x20 |
| Threads | ||
| Thread quantity | pcs. | 40 |
| Metric | mm | 0,5-7,5 |
| Imperial | vit / inch | 4-60 |
| Module | mm | 0,25-3,75 |
| Diameter | vit / inch | 8-120 |
| Carriage | ||
| Cross slide stroke | mm | 245 |
| Top slide stroke | mm | 125 |
| Tailstock | ||
| Tailstock diameter | mm | 60 |
| Tailstock taper | KM | 4 |
| Tailstock travel | mm | 130 |
| Motor | ||
| Number of gears of main motor | pcs. | 12 |
| RPM range. stepless | rev / min | 18-2130 |
| Motor power | kW | 7,5 |
| Rapid traverse motor power | kW | 0,55 |
| Coolant pump motor power | kW | 0,18 |
| Weight | ||
| For DBC 500 | kg. | 1520 |
| For DBC 750 | kg. | 1570 |
| For DBC 1000 | kg. | 1660 |
| Size | ||
| Length for DBC 500, 750, 1000 | mm | 2100, 2350, 2850 |
| Width | mm | 980 |
| Height | mm | 1260 |
Standard equipment
Main Motor 7,5 KW with frequency inverter Schneider 400V, 3-phase 50/60 Hz, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, 200mm. flange, Back cover along lathe, Chuck cover plate, Toolpost cover, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, Fast-screwing tailpost, Reductor for tailpost ram, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual